Liberator 351 Windsor Roller Blocks
Need a bare machined block for your do it yourself project? Don't have a competent machine shop locally? This is becoming more and more common these days as alot of the older machine shops that did not change with the times are going out of business. Fordstrokers is a FORD ONLY machine shop, small block ford engines are all we machine and build 6 days a week. Have confidence that your block will be machined to very strict tolerances. Look below at all the features we offer and you will see why this is great opportunity and very affordable for your next ford project.
No gimmick levels on machine work, just strict quality machine work you can trust in when building your engine. NO core charge ever, and we will paint your engine block any color you would like, no extra charge. 3-5 day turn around time. Shipping is a fixed $100 dollars anywhere in the united states, it must be either picked up at a nearby trucking terminal or shipped to a commercial address.
- Seasoned F4TE 351 Roller Block (Uses standard 302 roller lifters, dogbones and spider tray)
- Baked
- Shotblasted
- Magnafluxed
- 99.9% 4.030 Bore, can be bored and honed to 4.040 if you need this, just select the bore option below when ordering
- Bored On Kwikway Boring Bar
- Torque Plate Honed on Peterson Powerstroke Hone, finish honed to within .0001-.0003 out of round and taper
- Surfaced with BHJ block fixture on CBN Winona Van Norman Surfacer (8-12 Ra Finish)
- Main Bearing Bores Align Honed on Sunnen Ch-100 Hone (.0001-.0002 taper)
- Stroker Clearanced
- Clevite77 Camshaft Bearings Installed
- Deep Seat Freeze Plugs Installed
- Screw In Oil Galley Plugs Installed
- Camshaft Retainer Plate Included
- ARP Main Studs Included
Add new post