FordStrokers 331/347 Liberator Longblock

Here is a complete list of all machine oprations and all parts used inside of our 331 -347 Liberator Long Block

• Seasoned 302 Hydraulic Roller Core Block
• Oven Baked
• Shotblasted (Remove scale, rust)
• Magnafluxed for cracks
• Cylinders bored on Kwik-Way Boring Bar and Table
• Finish honed on Sunnen SV-616 Hone with BHJ Aluminum Torque Plates, Fel Pro Head Gaskets and ARP Hardware (.0001-0002 Taper MAX)
• Plateau Brushed (Provides Instant Ring Seal)
• Main Bearing Bores Align Honed on a Sunnen CH-100 Hone
• Deck surfaced on a Winona Van Norman CBN surfacer (Ra Finish compatible with MLS Gaskets)
• Screw In Oil Galley Plugs
• Lifter Valley Oil Drain Backs Chamferred
• Oil Filter Inlet Chaferred
• Threaded Holes Chased
• Lifter Bores Honed
• Crankshaft Balancing done on Hines Dominator XP Digital Balancer (.02 Grams) - Balanced to 28oz
• Camshaft Degreed
• Measure for pushrod length which provides the correct valvetrain geometry
• Adjust Valve Lash

Now let's take a look at what's inside of a Fordstrokers Liberator 331 -347 Long Block

• Scat 9000 Cast Steel 3.250 or 3.400 Crankshaft
• Scat 4340 Forged I-Beam 5.400 Connecting Rods with ARP 8740 Capscrews and Full Floating Pin End
• Probe SRS 2618 Forged Aluminum Flat Top Pistons (10.5:1CR, TFS Valve Reliefs,  Dish or Flat Top Pistons, SAME Price, you choose)
• Clevite 77 Main Bearings
• Clevite77 Rod Bearings
• Clevite77 Camshaft Bearings
• Perfect Circle Moly File Fit Rings (Gapped Specifically for your application)
• Fel-Pro 1 Piece Rear Main Seal
• ARP Main Studs with Oil Pump Pickup Provision
• Deep Seated Freeze Plugs
• Screw In Oil Galley Plugs
• Camshaft Retainer Plate
• FordStrokers HYD Roller Camshaft - Degreed (Solid Roller also available)
• SA Gear Billet Timing Chain w/Torrington Bearing
• Camshaft installed and degreed
• TEA Twisted Wedge Fast as Cast 190cc Cylinder (with PAC micropolished 1.290 spring - 140# seat - 425# open)
• Comp Cams HYD Roller Lifters
• Dog Bones and Spider Tray
• 4130 Chromemoly .080 Wall 1 Piece Formed End Pushrods (Custom Length)
• Comp Cams Ultra Gold Rocker Arms 1.6
• Fel Pro 9333 Head Gasket
• ARP Head Bolts

Optional Complete Bottom End -

• Melling Oil Pump M68
• ARP Oil Pump Bolts
• Moroso Oil Pump Pick up
• ARP Billet Oil Pumpshaft
• Fel Pro 1 Piece Pan Gasket
• Moroso 7qt Oil Pan
• Mr. Gasket Oil Pan Bolts
• Timing Chain Cover (Fox body,front sump, 94/95)
• Oil Pump Pickup to Oil Pan Clearance Set to .375 - .500