331-347 DIY Liberator Short Blocks
Fordstrokers DIY Shortblock. We have come up with a way were you get to actually build your shortblock while saving some money, making it a win-win situation. Are you the type of guy who likes to get his hands dirty and build his own motors? Want to save some money at the same time as well? Then this is perfect for you. It's quite simple, we are basically offering our Liberator short blocks unassembled, you put them together and reap the rewards of self fulfillment and accomplishment. Here's what is done and included below
- Fully Machined Roller Block
- Bored
- Torque Plate Honed
- Deck Surfaced (MLS Hed Gasket Compatible Finish)
- Align Honed Main Journals
- Screw In Oil Galley Plugs
- Freeze Plugs Installed
- Cam Bearings Installed
- Stroker Notched
- Painted ANY Color You Wish
- Scat 9000 3.250 or 3.400 Stroker Crankshaft
- Scat 4340 Forged I Beam Connecting Rods with ARP Capscrews
- Probe SRS 2618 Forged Pistons, Flat Top, Dish or Dome Same Pricing, you choose your piston
- Clevite77 Main Bearings
- Clevite77 Rod Bearings
- Clevite77 Cam Bearings
- ARP Main Studs with oil pump pickup provision
- Perfect Circle Moly File Fit Piston Rings
- Fel Pro Rear Main Seal
- Flat Top pistons will yield 10.5:1 on a 347 and 10.0:1 on a 331 using a 58cc head and .041 gasket.
- Dish pistons can be substituted for no additional charge and will lower the compression ratio for boosted applications
- Please specify which heads you will be using in comments section upon checkout
The blocks will be fully machined and ready for assembly, cam bearings installed, screw in oil galley plugs installed, freeze plugs installed and painted any color of your choice. The rotating assembly is fully balanced to 28oz, within .05 grams. This a great way to have fun and experience building your own engine. Plus lead time is shorter, your block and stroker kit will be ready for delivery in about 4 - 6 weeks. Should you have any questions, don't hesitate to contact us at anytime. Many more pictures to come to give you a better idea, thanks
Woody
Here is what is included in the complete bottom end package -
- FordStrokers HYD Roller Custom Camshaft
- SA Gear Billet Timing Chain w/Torrington Bearing
- Melling Oil Pump M68
- Moroso/Canton Oil Pump Pick up
- ARP Billet Oil Pumpshaft
- Fel Pro 1 Piece Pan Gasket
- Moroso/Canton 7qt Oil Pan
- Mr. Gasket Oil Pan Bolts
- Timing Chain Cover
- Fel Pro Timing Chain Cover Gasket Set
- Cam Retainer Plate
- ARP Oil Pump Bolts
- ARP Cam Bolt
If you already have some of these parts, you can customize the package to fit your needs, just give us a call at 630-462-3978 or email nicole@fordstrokers.com
Add new post