Trick Flow Cylinder Heads
Small block ford cylinder head by Trick Flow Specialties. All of our heads are custom, meaning you can not buy these heads in this configuration from Trick Flow, Summit Racing or any other Trick Flow dealer. All Trick Flow heads originate from Total Engine Airflow, where we have worked together to come up with a custom valve train that can not be bought anywhere else on Trick flow cylinder heads.
The differences between our TEA / Fordstrokers cylinder heads is in the valve springs, valve locks, retainers and seals.
When you purchase a set of trick flow heads from any trick flow dealer, summit racing or trick flow themselves, they come with a standard 1.460 or 1.470 hydraulic roller spring. While this is ok, spring technology has come light years in the last 5 years and there are much better valve spring options today. Fordstrokers prepped trick flow heads such as the twisted wedge heads, of all sizes come standard with the following.
- Comp Cams 1.250 Machined Steel Retainers
- PAC 1.300" Dual Valve Springs, 140lbs seat, 400lbs open, .650 lift capable, 1.070 coil bind
- Stefs Machined Steel .505 1.300 Spring cups
- Crower 7* +.050 11/32 valve locks
- .496 x .341 Viton Valve Seals
- 1.800 Install Height
The above valvetrain is capable to handle nearly any hyd roller camshaft thrown at it. We also have upgrades available, such as stronger springs, titanium retainer.
If you are price shopping, keep in mind the valvetrain you will get on your trick flow heads elsewhere will be signifigantly different than ours, this is why our pricing tends to be higher. Quality comes at a price, do it right the first time!