HomeLifters Comp Cams Link bar Hydraulic Roller Lifters
Comp Cams Link bar Hydraulic Roller Lifters
These COMP Cams Pro Magnum hydraulic roller lifters are specifically designed to perform at higher engine speeds. When engines are equipped with a hydraulic roller camshaft, high rpm is limited by the improper positioning of the internal piston, as the lifter inevitably "pumps up."
This improper location results in broken valves, and, therefore, leads to lost power or sometimes even engine failure. These lifters offer a distinct advantage over standard high-performance hydraulic lifters, especially in race applications where a hydraulic lifter must be used.
These lifters are to be used in all non roller 302 and 351 windsor blocks. Dont get caught up in the hype of using stock 302 roller lifters and the dog bone/spider tray setup in non roller blocks. IF you use the stock style ford hydraulic roller lifters in the early non roller blocks you must use a small base circle camshaft and thats not a good thing my friends. If you need more info please contact us.
Will fit ALL 289-302 and 351 windsor block, roller and non roller
Lifters 
